Description : A water-based, film-forming product that chemically transforms rust into an inert, non-corrosive material.
Ues : on rusted steel surfaces only where minimum surface preparation (scraping and wire brushing) is practical. For mild industrial environments. Not for immersion service.
Application : Apply only when air and surface temperatures are between 50-90⁰ F (10-32⁰ C) and surface temperature is at least 5⁰ F above the dew point. Shake well before using. Pour a small amount of Rust Reformer int oa separate non-metallic container. Brush material evenly across the surface to be coated. Rust Reformer will dry to a black film in ten minutes. Do not return any unused Rust Reformer to the original container. Doing so will contaminate the remaining material and reduce or eliminate its effectiveness.
Recommended Topcoats : Industrial Enamel high gloss, Semi-gloss, flas and metallic finishes
Compatible topcoats : Rust Reformer can be top-coated with many solvent-based finishes; however, for optimal performance with high-performance coatings, the surface preparation and primer recommendation for those coatings should befollowed. For water-based finish coatings a solvent-based primer should be used fist.