Beger SUPER GOLD A/E 303 เบเยอร์ ซุปเปอร์โกลด์ A/E 303

• Acrylic oil gold color A/E 303 European gold shade. Ultra Premium Grade
• Covering an area of 40-45 square meters/gallon/trip
• Suitable for spraying and painting on concrete, steel, metal or wood surfaces.

• mixed with pearl powder beautiful color, bright, clear, not sinking.
• Resistant to UV light and hot weather, sun, rain in Thailand as well.
• Excellent adhesion to the surface without peeling
• Easy to use, quick drying, safe, mercury and lead free.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• Allow the cement surface to dry completely for at lead 1 mounth and have less than 14% moisture content, then clean the grease stains. and dust all out

• Scrub the old paint that has peeled and deteriorated completely. (Do not use a wire brush) and then clean.
• In the case of mold and algae should be scrubbed off completely before Then use a moss fungicide solution. Beger Mold Free M-001 impreganates without rinsing.
• after cleaning Apply Beger ProQuick Primer B-1900 Multipurpose Cement Primer 1 coat.

• The case is an old wood that has never been painted before. or is it a wood that has been painted in the past and deteriorated peeling paint film Use sandpaper to sand until the original wood.
• In case of new wood, use sandpaper to sand off excess wood burrs. Then clean the surface free of dirt.
• To protect the wood from mold termites, weevils and other woodeating insects, it should be treated with a clear coat of Begerfrite. (water or oil formula) 1 time

• Clean all grease and dust. The surface is shiny. Use fine sandpaper 220-280 to sand the surface to increase adhesion.
• In the case of rusted metal, the rust should be polished out first.

• Apply or spray with Primer A/E 8855 yellow acrylic lacquer or 1 coat of red acrylic lacquer A/E 8866

• Mix Beger Gold Paint A/E 303 with Thinner Beger M-1199 or M-1188 in a ratio of 1 : 1 and apply 2-3 times.
• In case of wanting to add shadows can be coated with Acrylic Lacquer Gloss A/E 4400

  In case of spraying :

• Mix Beger A/E 303 gold lacquer with thinner Beger M-1199 or M-1188 in a ratio of 1 : 2 and spray 2-3 rounds.
• In case of wanting to add shadows can be coated with Acrylic Lacquer Gloss A/E 4400

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***