Beger SUPER GOLD A/L 123 เบเยอร์ ซุปเปอร์โกลด์ A/L 123

• Swiss gold acrylic lacquer A/L 123, ultra-premium grade.
• Covering an area of 30-40 sqare meters/galoon/trip
• Suitable for spraying or paint on the cement surface steel/metal surface or wood surface
• Sovent Thinner Beger M-77 or M-5588

• Mixed with pearl powder Beautiful color, bright, clear, not sinling.
• Resestant to UV light and hot weather, sunlight and rain in Thailand as well.
• Excellent adhesion to the surface without peeling
• Easy to use, quick drying, safe, mercury and lead free.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• Allow the cement surface to dry completely for at least 1 month and have less than 14% moisture content, then clean the grease stains. and dust all out

• Scrub the old paint that has peeled and deteriorated completely. (Do not use a wire brush) and then clean it.
• In the case of mold and algae should be scrubbed off completely before Then use a moss fungicide solution. Beger Mold Free M-001 impregnates without rinsing.
• after cleaning Apply Beger ProQuick Primer B-1900 Multipurpose Cement Primer 1 coat.

• The case is an old wood that has never been painted before. OR is it a wood that has been painted before? and deteriorated peeling paint film Use sandpaper to sand until the original wood.
• Incase od new wood, use sandpaper to sand off excess burrs. and clean the surface free from dirt
• To protect the wod from fungi, temites, weevils and other wood-eating insects, it should be treated with clear painted begerdirte. (water or oil formula) 1 time

• Clean all grese and dust. The surface is shiny. Use fine sandpaper no. 220-280 to sand the surface to increase adhesion.
• In the case of rusted metal, thhe rust should be completely polishes off firt.

• Apply or spray with Yellow water-based acrylic primer A/P 1002 or Acrylic water-based red primer A/P1001 1 round.

• Apply or spray with Primer A/E 8855 yellow acrylic lacquer or 1 coat of red acrylic lacquer A/E8866.

• Apply pr spray with Primer A/E8855 yellow acrylic lacquer or 1 coat of red acrylic lacquer A/E8866.

• Mix Beger Gold Lacquer A/L 123 with Thinner Beger M-77 or M-5588 in a ratio of 1:1 and apply 2-3 coat.
• If you want to add shadows can be coated with Acrylic Lacquer Gloss A/E4400

• Mix Beger Gold Lacquer A/L 2-3 with Thinner Beger M77 or M-5588 in a ratio of 1:2 and spray 2-3 times.
• If you want to add shadows can be coated with Acrylic Lacquer Gloss A/E4400

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***