Beger Concrete Sealer

  Bayer Concrete Sealer or C-Guard Sealer is a clear epoxy varnish primer. For general floor and concrete work, 2-component, clear color, effective good penetration into the surface Provides excellent adhesion High durability, chemical resistance, acid resistance, alkali resistance, excellent scratch resistance, water resistance, excellent long lasting shine

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• for new textures The surface must be clean and dry. Free from other contaminants A good surface should conform to the ISO 8504 standard.
• For painted surfaces Use high-pressure water jet of WJ3 (NACE No.5/SSPC-SP12) or abrasive with a machine tool to achieve cleanliness. Or polished with a machine tool to get a rough concrete surface before paint work. for concrete surface Remove the surface of the concrete completely. The best way is Cleaning with Shot Blasting is the use of air to push a round steel ball. shot down the concrete surface To open the surface of the concrete face that is not good. Along with sucking the dirt out at the same time or washing with saline (Hydrochloric HCL) at a concentration of 10% by mixing 3 parts water to 1 part acid by pouring the acid into the water, stirring a little, and pouring it onto the surface. of concrete on the floor Leave it on the concrete surface for 5-10 minutes, then rinse with clean water 1-2 times or spray with high-pressure water (about 150 bar) to remove dirt.

• Apply with Beger Concrete Sealer Epoxy primer, 2-part system, type, mix ratio Part A: Part B = 4:1. Each overcoat should be left for at least 6 hours.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***