The primer is resistant to humidity up to 40%. It can be applied over after plastering within 2 days, making the job faster. Reduce the problem of peeling and fading. Provides higher resistance to alkalinity and acidity than general primers. With special formula glue, PLIOLITE Resin, suitable for old and new plaster.
Feature :
Primer, oil-based formula, grade Super Ultra Premium, application area 35-40 sq.m./gallon/trip
Properties Can be used for both new and worn plaster. Prevent all color problems maximum protection against humidity Can be applied to the surface with a moisture content of not more than 35%, can be applied over a newly finished plastering floor in only 2 days, can cover the high surface, cover 2 times that of the general cement primer, penetrate deeply, have excellent adhesion on all types of fiber cement and mortar surfaces Resistant to alkalinity and humidity of cement surfaces Against the growth of mold and moss. Prevent paint peeling Aneurysm and chalky dust Prevents discoloration and fading
SURFACE PREPARATION The surface to be applied must be clean and dry. Free from grease stains, dust stains The part that is rusted, dusty or flaky. fungal surface Must be cleaned before by bleach and rinse thoroughly Allow to dry and then apply Beger Mold Free M-001. Cracked walls. Fill with Bayer Acrylic Filler No. F-200 for areas where cracks are less than 0.3 mm wide, or use Bayer. acrylic sealant Repair for areas with cracks greater than 0.3 mm and should be polished and smoothed before painting. Good surface preparation without any dust or shedding will ensure the adhesion of Bayer Ultra Hyde Primer B-2100 in urgent cases. Leave the new plastered wall for at least 2 days. The moisture content is less than 35%.
Color system Primer: Bayer Ultra Hyde Primer No. B-2100 1-2 coats Topcoat: Bayer, 100% pure acrylic water based paint, desired model. 2 trips