Jotun Resist 78 Product description : This is a two component moisture curing inorganic zinc ethyl silicate coating. It is a fast curing, very high zinc
dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO
12944-5. It provides excellent corrosion protection as part of a complete coating system. It is heat resistant up
to 540 °C. To be used as primer in atmospheric environments. Suitable for properly prepared carbon steel
substrates only. This product complies with ASTM D520 type II zinc dust.
Typical use : Protective:
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment. Specially designed as a primer in coating systems where extended durability is required.
Approvals and certificates :
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in
offshore environment, below 120 °C.
Tested by independent institute for static coefficient of friction.
Additional certificates and approvals may be available on request.
Surface preparation:
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.