Jotamastic 87 ALU Product description : This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Typical use :
General :
Primarily designed for maintenance and repair.
Marine :
Outside hulls, exterior and interior areas, including water ballast tanks.
Protective :
Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates :
Low flame spread class 1, BS 476, Part 7, 1971. Warrington Fire reasearch, Naval Eng, Stand 713: Issue 3 Grain, Newcastle Occupational Health
Additional certificates and approvals may be available on request.
Other variants available :
Jotamastic 87
Jotamastic 87 GF
Refer to separate TDS for each variant.
Surface preparation :
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.