KOBE Acrylic Lacquer Spray (All Purposes) is economical grade spray paint, quick drying, durability, glossy finishing and good adhesion for all surfaces.
Formulated by concretrated lacquer.
Used for exterior and Interior.
Durability , quick drying and good adhesion.
Quick dry - Color long lasting
Surfaces should be clean, dry and free from oil, grease and rust before spraying.
Shake can thoroughly until consistent sound of peas (2 minutes) before used and while spraying should shake can periodically.
2 coats for excellent color uniformity. (hold can approximately 1 foot from object to be sprayed, thin spraying for the first coat and let it dry for 10 minutes, then spray the second coat)
Safety precautions
Do not apply near flames.
Do not store at temperature more than 40 °C.
Ensure good ventilation during application and drying.
When used it up, do not burn the can or throw it into fireplace.
KOBE All-Purposes Spray is based on high quality nitrocellulose and acrylic resin that gives the multi-purposes aerosol product. The properties of this product are fast dry, high gloss and good adhesion on plastic, metal and wood which have been primed with suitable primer.
TYPICAL USE
It is most versatile and handy for multi-perposes application such as motorcycle, old table, chair, nursery furniture, toys, shipping marks, steel chairs, bicycles, electric fan, lamp and etc.
APPLICATION INFORMATION Surface Preparation
The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
Chalky surfaces or loose material must be removed by stiff brush.
The surface must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.
Primer
Apply suitable primer for desired surface or apply with KOBE Primer Surfacer Grey Spray #266 at least 2 coats to enhance adhesion.
Topcoat
1. Before use, shake the can of KOBE All-Purposes Spray thoughly around 2 minutes and shake periodically during spray.
2. Spray with distance from the required object around 20 – 25 cm and spray from left to right and top to bottom of the object.(Depend on skill and experience)
3. The first coat must be thin and allow to dry at least 10 minutes before spray the second coat.
Application Method : Spray
Condition During Application
Use respiratory mask with charcoal and dust filter. For prolonged or repeated handling, use nitrile gloves or polyvinyl alcohol gloves. Use safety eye wear designed to protect against splash of liquids.
No smoking.
STORAGE
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
After used, the container must be kept tightly closed.