WIN Plastic Primer Spray No.263 is the special primer to enhance adhesion for plastic surfaces such as polypropylene, polyethylene and ABS.
Formulated by high quality acrylic lacquer.
Used for exterior and Interior.
2 adjustable nozzles for horizontal 2 directions.
Durability, quick drying and good adhesion.
Enhances the adhesion of the film specially for the plastic surface.
Application
Surfaces should be clean, dry and free from oil, grease and rust before spraying.
Shake can thoroughly until consistent sound of peas (2 minutes) before used and while spraying should shake can periodically.
2 coats for excellent color uniformity. (hold can approximately 1 foot from object to be sprayed, thin spraying for the first coat and let it dry for 10 minutes, then spray the second coat)
Safety precautions
Do not apply near flames.
Do not store at temperature more than 40 °C.
Ensure good ventilation during application and drying.
When used it up, do not burn the can or thorw it into fireplace.
Toa Win Plastic Primer Spray #263 is a special product which formulated for soft and hard plastic. The properties of this primer are fast dry, flexible and good adhesion on any plastics surfaces that help the color topcoat permanently stay on the plastic surfaces without peeling.
TYPICAL USE
Toa Win Plastic Primer Spray #263 is suitable for ABS (Acrylonitrile Butadiene Styrene), PP (Polypropylene) and PE (Polyethylene / PE)
APPLICATION INFORMATION
Surface Preparation
The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
Chalky surfaces or loose material must be removed by stiff brush.
The surface must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.
Primer
1. Before use, shake the can of WIN Plastic Primer Spray #263 thoughly around 2 minutes and shake periodically during spray.
2. Spray with distance from the required object around 20 – 25 cm and spray from left to right and top to bottom of the object. (Depend on skill and experience)
3. The first coat must be thin and allow to dry at least 15 minutes before spray the second coat.
Topcoat
Apply WIN All-Purposes Spray (or other topcoat sprays) at least 2 coats.
Application Method : Spray
Condition During Application
Use respiratory mask with charcoal and dust filter. For prolonged or repeated handling, use nitrile gloves or polyvinyl alcohol gloves. Use safety eye wear designed to protect against splash of liquids.
No smoking.
STORAGE
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
After used, the container must be kept tightly closed.