Toa WIN Primer Grey Spray No.266 Toa Win Primer Grey Spray No.266 is primer to highlight topcoat for long lasting and durability.
Formulated by high quality acrylic lacquer.
Used for exterior and Interior.
2 adjustable nozzles for horizontal 2 directions.
Durability, quick drying and good adhesion.
Primer Spray Paint
Application
Surfaces should be clean, dry and free from oil, grease and rust before spraying.
Shake can thoroughly until consistent sound of peas (2 minutes) before used and while spraying should shake can periodically.
2 coats for excellent color uniformity. (hold can approximately 1 foot from object to be sprayed, thin spraying for the first coat and let it dry for 10 minutes, then spray the second coat)
Safety precautions
Do not apply near flames.
Do not store at temperature more than 40 °C.
Ensure good ventilation during application and drying.
When used it up, do not burn the can or thorw it into fireplace.
Toa Win Primer Surfacer Grey Spray #266 is based on high quality nitrocellulose, modified alkyd resin and special pigments that recommend to use as all-purposes primer. The properties of this primer are flexible, fast dry and good adhesion on plastic, metal, wood and etc.
TYPICAL USE
Recommend to apply WIN Primer Surfacer Grey Spray #266 as a primer before topcoat with KOBE All-Purposes Spray (or other topcoat sprays) to enhance the adhesion.
APPLICATION INFORMATION Surface Preparation
The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
Chalky surfaces or loose material must be removed by stiff brush.
The surface must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.
Primer
1. Before use, shake the can of WIN Primer Surfacer Grey Spray #266 thoughly around 2 minutes and shake periodically during spray.
2. Spray with distance from the required object around 20 – 25 cm and spray from left to right and top to bottom of the object.(Depend on skill and experience)
3. The first coat must be thin and allow to dry at least 15 minutes before spray the second coat.
Topcoat
Apply WIN All-Purposes Spray (or other topcoat sprays) at least 2 coats.
Application Method : Spray
Condition During Application
Use respiratory mask with charcoal and dust filter. For prolonged or repeated handling, use nitrile gloves or polyvinyl alcohol gloves. Use safety eye wear designed to protect against splash of liquids.
No smoking.
STORAGE
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
After used, the container must be kept tightly closed.