Toa SuperShield Décor can create luxury beautiful seamless designs finishing. For interior decoration such as living room, hallway, bedroom condominiums, hotel, restaurants, shops or others decoration.
Luxury Finishing.
Low Odour and Non Toxic Water-borne Technology.
Anti Dirt Pick-up and Easy to Clean.
Type of Finishing
Sheen
Can Size
1 GL , 2.5 GL
Support
Application Area
It can be applied to various kinds of substrate such as concrete, mortar and gypsum board
SSA Décor Primer & Base is ultrapremium grade 100% pure acrylic sheen emulsion paint. SuperShield Decor Effect is top coat and self primer for new mansonry surface and feature are excellent alkali resistance, excellent adhesion, long life preventive of fungi and easy to clean and give better cleanliness than regula paint.
SSA Décor Primer & Base is ideal for application to interior concrete, new and old masonry surface, plasters, bricks, asbestos shingles and siding.
APPLICATION SYSTEM Surface Preparation Old surface
1. Powdery and chalky surface must be scrubbed and cleaned with water
2. Remove all algae and mould by water and leave it dry after that apply 1 coat of TOA 113 Microkill.
3. At a crack width less than 1 mm. and not break continuity Putty for filling with TOA acrylic acrylic filler.
4. At a crack wider than 1 mm. or a different continuity. Putty for filling with TOA Acrylic Sealant.
5. For more smooth surface use TOA 102 D-Cote.
New surface
1. Leave surface to completely dry (~1 month). Make sure the surface has humidity less than 14%
2. Clean surface, ensure if free from dirt and grease
3. For more smooth surface use TOA 102 D-Cote.
Coating system
Primer
Apply 1 coat of TOA Contact Primer for old surface.
Topcoat
Apply 2 coat of SuperShield Décor Primer & Base
**Effect coat
Apply by normal roller and creat design with special tool with in 10 minutes. (number of effect coat depend on design)
**Clear coat
Apply 1 coat of SuperShield Decor Clear. (If need special washable film) ** remark for special system
Recommendation
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.