Toa SuperShield Décor can create luxury beautiful seamless designs finishing. For interior decoration such as living room, hallway, living room, bedroom condominiums, hotel, restaurants and shops or others decoration.
luxury Finishing.
Low Odour, Non Toxic Water-borne Technology.
Anti Dirt Pick-up and Easy to Clean.
Type of Finishing
Sheen
Can Size
1 GL
Support
Application Area
It can be applied to various kinds of substrate such as concrete, mortar and gypsum board
SSA Décor Effect is ultrapremium grade 100% pure acrylic sheen emulsion paint. SuperShield Decor Effect is semi transparent top coat provide effect design. and features are easy to create effect dasign by many tools, Long life preventive of fungi non yellowing and excellent adhesion. SSA Décor Effect is ideal for application to interior wall design
APPLICATION SYSTEM Surface Preparation
Old surface
1. Powdery and chalky surface must be scrubbed and cleaned with water
2. Remove all algae and mould by water and leave it dry after that apply 1 coat of TOA 113 Microkill.
3. At a crack width less than 1 mm. and not break continuity Putty for filling with TOA acrylic acrylic filler.
4. At a crack wider than 1 mm. or a different continuity. Putty for filling with TOA Acrylic Sealant.
5. For more smooth surface use TOA 102 D-Cote.
New surface
1. Leave surface to completely dry (~1 month). Make sure the surface has humidity less than 14%
2. Clean surface, ensure if free from dirt and grease
3. For more smooth surface use TOA 102 D-Cote.
Coating system
Primer
Apply 1 coat of TOA Contact Primer for old surface.
Topcoat
Apply 2 coat of SuperShield Décor Primer & Base
**Effect coat
Apply by normal roller and creat design with special tool with in 10 minutes. (number of effect coat depend on design)
**Clear coat
Apply 1 coat of SuperShield Decor Clear. (If need special washable film) ** remark for special system
Recommendation
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
: The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.