Toa Shark Gloss Clear Lacquer S-5000 is formulated from Nitro-Cellulose, resin and bio-based plasticizer for interior wood application. Paint film is fast-drying, high gloss and highly adhesive with real wood and plywood with texture.
Type of Finishing
Gloss
Can Size
1/4 GL., 1 GL., 5 GL.
High Concentration & Worth Paying
High concentration & Mixed with thinner for higher coverage area.
Fast-drying & High gloss.
Flexible film No crack.
Transparent film & Apparent wood texture/grain.
Free from dangerous heavy metals Lead & Mercury.
Usage Area
Suitable for interior wood coating application and furniture made from real wood
and plywood such as cabinet, table and chair. Not recommended for wood flooring.
Toa Shark Lacquer Gloss #S5000 is based on high quality Nitrocellulose Resin and Bio-Based Plasticizer which designed especially for interior wood coating. Properties of the products are high film built, fast dry, brilliant gloss and good adhesion on solid wood and plywood.
APPLICATION SYSTEM Surface Preparation
Old surface
1. Chalky surfaces or loose material must be removed by stiff brush.
2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
New surface
1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.
Coating system
Primer
Apply by brush or spray with Shark Lacquer Sanding Sealer # S5555 at least 2 coats. (Recoatable time is at least 20 minutes)
Topcoat
Apply by brush or spray with Shark Lacquer Gloss # S5000 at least 2 coats. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface
Recommendation The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.