Toa White Lacquer Primer Surfacer Fast Dry is formulated from Nitro-Cellulose, alkyd resin and premium color pigments. Paint film is fast dry, easy to scrub, high coverage and highly adhesive with many surfaces such as real wood, plywood, MDF board and metal.
Type of Finishing
Matt
Can Size
1 GL., 5 GL.
Fast-drying, Easy to Scrub and High Coverage
High concentration & Able to cover sandpaper scrub.
Suitable for white or light color top coat.
Smooth & Thick paint film.
Fast dry & Easy to scrub.
Free from dangerous heavy metals Lead & Mercury.
Usage Area
Suitable for wood furniture made from real wood, plywood and MDF board with non-yellowish colors such as cabinet, table and chair. Also, it can be applied on metal, plastic and decorative car parts.
Toa Lacquer Primer Surfacer # NP09 is based on Nitrocellulose, Alkyd Resin and high quality pigments. Properties of the products are fast dry, easy to sand, good hiding power, excellent adhesion on plywood, MDF and solid wood. Recommend to use as primer for ply wood, MDF, solid wood and interior wood furniture.
APPLICATION SYSTEM Surface Preparation
Old surface
1. Chalky surfaces or loose material must be removed by stiff brush.
2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
New surface
1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants
Coating system
Primer
Apply by brush or spray with TOA Lacquer Primer Surfacer # NP09 at least 2 coats. (Recoatable time is at least 20 minutes)
Topcoat
Apply by brush or spray with TOA Industrial Lacquer Non-Yellow at least 2 coats.
Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface
Recommendation The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.