TOA Gloss Lacquer Waterborne Toa Lacquer Waterborne Gloss is based on acrylic emulsion copolymer. The properties of this product are fast dry, pale in color, good waterproof, high flexibility, high film build and good penetration into the wood that provides excellent adhesion. Recommend for interior woodwork and DIY interior wood furniture, for example; table, chair, cabinet and etc.
Type of Finishing
Gloss & Transparent
Can Size
1 GL.
2 Times Better Scratch Resistance
Low VOCs & Low odour with Green Technology. Easy to use, fast-drying and able to move in within 1 day. Self Cross-link Technology Enhancing paint film strength & adhesion. Prevent water penetration. Transparent paint film & Highlighting wood texture/grain. Safe with European Standard EN71 Free from 8 dangerous heavy metals.
Usage Area
Suitable for wood coating application & all kinds of wood furniture made from real wood and plywood with texture such as cabinet, table and chair. Not recommended for interior wood coating application.
FEATURES Toa Lacquer Waterborne Gloss is based on acrylic emulsion copolymer. The properties of this product are fast dry, pale in color, good waterproof, high flexibility, high film build and good penetration into the wood that provides excellent adhesion. Recommend for interior woodwork and DIY interior wood furniture, for example; table, chair, cabinet and etc.
APPLICATION SYSTEM Surface Preparation Old surface
For coated wood or wood with old or peeling paint film or old wood with no coating.
Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
Sand over the painted film with TOA abrasive paper no. 240-320
then clean the surface to remove grease, dust, oil or dirt.
New surface
1. Use Toa abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. Clean the surface until no dust remain.
Coating system Topcoat
1. Apply by brush with TOA Lacquer Waterborne Matt at least 3 coats.(Recoatable time is at least 1 hours)
2. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.