สีย้อมไม้ ทีโอเอ วู้ดสเตน ชนิดเงา TOA WoodStain Gloss

Type of Finishing	Gloss
Can Size	1/4 GL., 1 GL.
Support

• 2 Times higher durable paint film with Titanium Nano agent from Germany.
  
• Translucent paint film & Highlighting wood texture appearance by Transparent Pigment.
  
• 5 Times faster dry & Reducing dust stick on paint film.
  
• With UV Absorber, preventing wood from UV light.
  
• Flexible film No crack, blister and peel.
  
• Easy to wash.
  
• Excellent anti-bacteria, anti-moth and anti-termite.
  
• Free from dangerous heavy metals Lead & Mercury.

• Suitable for exterior and interior wood coating application such as wall, gable,
• ceiling, handrail, fence and furniture (except for wood flooring & roofing).

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating.
  • Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
  • Sand over the painted film with Toa abrasive paper no. 240-320
  • then clean the surface to remove grease, dust, oil or dirt
• New surface
  • 1. Use Toa abrasive paper no. 240 – 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. Clean the surface until no dust remain.

• Primer
  • Apply by brush with Toa Wood Preservative 1 coat. (Recoatable time is at least 30 minutes)
• Topcoat
  • 1. Mixing ratios between Toa Wood Stain Gloss and Toa Enamel Thinner No. 21 are 5:1 for first coat and 10:1 for second and third coat, respectively.
  • 2. Apply by brush with Toa Wood Stain Gloss at least 3 coats. (Recoatable time is at least 6 hours)
  • 3. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***