MD Gloss Enamel is based on a high quality alkyd resin and specially formulated to give excellent gloss, good color retention and durability with rust resisting property. It is characterized with quick drying, good flow and strong adhesion for metal substrate. Suitable for booth exterior and interior on all types of surface such as wood, metal hardboard and properly primer concrete.
Product Group
Economy
Type of Finishing
Gloss Finish
Can Size
1/4 Pound, 1 Pound, 1/4 GL, 1 GL, 5 GL
Good adhesion, Excellent gloss, worthiness and save money.
Based on a high quality alkyd resin.
Specially formulated to give excellent gloss.
Good color retention and durability with rust resisting property.
Characterized with quick drying.
Good flow and strong adhesion for metal substrate.
It is Enamel paint produced from high quality alkyd resin. Excellent gloss apperance and fungus resistance for metal, glossy surface, alloys or woods with good primer paint.
It is most suitable for the application of woods, metal, and other surface which have been primed for both exterior and interior, It is also ideal for using on narine applications heavy machineries, bridges, tower, trucks, pupic transport vehicles, etc. where toughness and durability are of prime importance.
APPLICATION SYSTEM Surface Preparation
Old surface ( Steel )
Polishing the paint film peeling out and clean the dust, rust and grease - free
Old surface ( Wood )
Polishing the paint film peeling out and clean the dust and grease - free
New surface
Steel substrate must be prepared ,free from rust,millscale,dirt,loose particles,and waxy contaminate.
Coating system
Primer for Steel
MD Red Oxide Primer 1-2 coat . (40 µ per coat)
Primer for Alloy
Toa Wash Primer for galvanized steel and aluminium alloy surface (10 µ per coat)
Toa MD Red Oxide Primer 1-2 coat . (40 µ per coat)
Primer for Wood
Toa MD Wood Primer (M-1600) or TOA Aluminium Wood Primer (G-1601) is required for new resinous wood. (40 µ per coat)
Topcoat
Toa MD Enamel gloss 2 coat (25 µ per coat)
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.