ทีโอเอ กลิปตั้น สีน้ำมันเคลือบเงา TOA GLIPTON High Gloss Enamel

Product Group	Premium
Type of Finishing	High Gloss
Can Size	1/4 GL, 1 GL, 2.5 GL
Support

• High quality varnish. Produced from synthetic resin and special pigments.
• With high intensity formula. Provides rich texture and high gloss finish with excellent surface protection.
• Durable all weather Easy care.
• Mix of anti-fungal and toxic substances. So clean, safe for health. And the environment. 

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• It is a top quality alkyd gloss finish especially developed to with stand the most severe condition of tropical climate. It is made from high quality alkyd goods light fasted pigments. This enamel has excellent gloss retention and resistance to fungus attack.

• It is most suitable for the application of woods,metal,both exterior and interior.It is also ideal for the uses as marine enamel,heavy machineries,bridges,towers,trucks,tractors,public transport vehicles etc. Where toughness and durability are of primer importance

• Old surface ( Steel )
  • Polishing the paint film peeling out and clean the dust, rust and grease - free
• Old surface ( Wood )
  • Polishing the paint film peeling out and clean the dust and grease - free
• New surface ( Steel )
  • Steel substrate must be prepared , free from rust , millscale , dirt , loose particles , and waxy contaminate.
• New surface ( Wood )
  • Wood substrate must be prepared , free from dirt , loose particles , and waxy contaminate.

• Primer
  • Steel
    • TOA Red Oxide Primer G-1024 1 - 2 coat. (40 µ per coat)

• • Alloy
    • Apply 1 coat TOA Wash Primer G-1168 for galvanized steel and aluminium alloy surface (10 µ percoat)
    • TOA Red Oxide Primer G-1024 1-2 coat . (40 µ per coat)
  • Wood
    • TOA Undercoat white ( G-1600 ) or TOA Aluminium Wood Primer ( G-1601 ) is required for new  resinous wood. (40 µ per coat)

• Topcoat
  • Apply TOA Glipton Enamel gloss 2 coat (30 µ per coat)

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***