TOA ExtraWET PRIMER Supreme damp proof priming innovation with breathable film. Formulated wiith strong adhension ability for both deteriorated/chalky old surface or fresh concreat new surface
Product Group
Ultra Premium
Type of Finishing
White - Matt
Can Size
1GL, 2.5GL, 5GL
Breathable film technology
Special formulation for severe damp surface upto 70% moisture content
Super damp proof
Superior breathable film
High penetration&Exceellent ahension
Best for all seasons, even after raining
Excellent alkali resistance
Anti-Fungus & Algea
Anti-efflorescense
Low ordor,safe foe users
Multi perpose Primer for fresh concreat
Suitable for old&new even fresh concrete, instantly apply
TOA Extra Wet Primer is an innovation product that designed for use as supreme damp proof primer. The properties of this product are low odor, easy to apply on wet cement or fresh concrete surface and excellent alkaline resistance that protect topcoat from efflorescence in cementitious materials. This product is super bonding agent that provides excellent adhesion between the substrates and paint film as well as it forms a breathable film that allows the releast of water vapor from substrates through out of the paint film to eliminate the risk of blistering.
APPLICATION SYSTEM Surface Preparation
New surface
: Allow the surfaces dry at least 2 days in case of speedy work.
: The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.
: TOA Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.
Old surface
The surfaces must be clean and free of dirt , wax , salt , old paint and other contaminants.
Chalky surfaces or loose material must be removed by stiff brush.
TOA113 Microkill is used to get rid of algae and fungi that left on the surfaces.
The surfaces must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.
TOA Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.
Coating system
Primer
Apply by brush with TOA EXTRA WET PRIMER 1 coat.
Topcoat
Can be topcoat with Acrylic Emulsion Paint and Alkyd Base Enamel Paint.
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.