SHARK Exterior and Interior Emulsion Paint Toa Shark Exterior and Interior Emulsion Paint. Formulated with fungus and mould resistance with no lead and mercury added. It is ideal for the protection and decoration for exterior and interior masonry substrates such as plaster, concrete, brick, gypsum board.
Product Group
Economy
Type of Finishing
Matt
Can Size
1/4 GL, 1 GL, 2.5 GL, 5 GL
Good adhesion, colourful smooth with colourful finishes, worthiness and save money.
FEATURES SHARK Emulsion Paint use an acrylic emulsion which is specially formulated for use on exterior. Does not contain mercury and lead so it would be safe to your health and stays clean for longer and suitable for save cost. It is ideal for application to both exterior and interior concretes, new and old masonry surface, plasters,bricks,asbestos shingles and siding.
APPLICATION SYSTEM Surface Preparation
Old surface
Powdery and chalky surface must be scrubbed and cleaned with water
Fungus and mildew growth must be cleaned off. Left to dry for 2-3 days.
Areas where the fungus to kill mold polished clean with liquid TOA Microkill. Cleaning. Then let it dry 1-2 days.
At a crack width less than 1 mm. and not break continuity Putty for filling with TOA Acrylic filler.
Around the crack. Wider than 1 mm. or a different continuity. Putty for filling with TOA Acrylic Sealant.
New surface
Substrate must be completely cured and dried (~1 month) free from oil , grease,mildrew, from release agent and foreign matters
For more smooth surface use TOA Acrylic Wall Filler
Coating system
Old Surface/Primer
Apply 1 coat of Supertech Contact Primer SP 1100
New Surface/Primer
Apply 1 coat of Shark Alkali Resisting Primer
Topcoat
Apply 2 coats of Shark Emulsion for Exterior and Interior.