IBIC TefGuard ไอบีไอซี เทฟการ์ด
IBIC TefGuardไอบีไอซี เทฟการ์ดIBIC TefGuard ไอบีไอซี เทฟการ์ด สีรองพื้นกันสนิม ระบบ 2 ส่วน สำหรับโลหะทุกชนิด มีประสิทธิภาพยับยั้งการเกิดสนิมเก่า และป้องกันการเกิดสนิมใหม่ มีสารคุณสมบัติพิเศษ PTFE ประสิทธิภาพการยึดเกาะสูง ทนทานทุกสภาวะ ทนทานสภาวะอากาศที่เปลี่ยนแปลง ทนต่อการขัดถู แรงกระแทกและสารเคมี และทนทานสภาวะที่แช่น้ำและฝังดิน มีอายุการใช้งานนานกว่าสีธรรมดา
คุณสมบัติ :
สีรองพื้นกันสนิม ระบบ 2 ส่วน สำหรับโลหะทุกชนิด
- หยุด ! การเกิดสนิมเก่า และป้องกันการเกิดสนิมใหม่
- มีสารคุณบัติพิเศษ PTFE ประสิทธิภาพการยึดเกาะสูง ทนทานทุกสภาวะ อายุการใช้งานนานกว่าสีธรรมดา
- ทาทับหน้าสีเก่าได้
- ทนต่อการขัดถู แรงกระแทก และสารเคมี
- ทนทานสภาวะอากาศเปลี่ยนแปลง
- ทนทานสภาวะที่แช่น้ำและฝังดิน
- ใช้ได้กับงานพื้นผิวอุณหภูมิต่ำกว่า 0 องศาเซลเซียส
ระบบการทาสี
- ขั้นที่ 1 การเตรียมพื้นผิว (สำหรับพื้นผิวเหล็ก โลหะ คอนกรีต)
-
- ขัดพื้นผิวให้เรียบ ทำความสะอาดพื้นผิวให้ปราศจากฝุ่นผง สิ่งสกปรกและคราบไขมันต่างๆ แล้วทิ้งให้แห้งสนิท
-
- ทาสีไอบีไอซี เทฟการ์ด (IBIC TefGuard) ลงบนพื้นผิว จำนวน 1 ชั้น
-
- ผสมสีไอบีไอซี เทฟเทน (IBIC TefThane) ตามสัดส่วน A:B = 4:1 (โดยปริมาตร) เข้าด้วยกัน ถ้าต้องการเจือจางให้ผสมด้วย ทินเนอร์ เทฟ-22 (Thinner Tef-22)
- ทาสีทับหน้าด้วยไอบีไอซี เทฟเทน จำนวน 1-2 ชั้น
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***

IBIC TefGuardIBIC TefGuard is a two component coatings based on epoxy resin composition modified with polyterafluoroethylene (PTFE) that can be used both as primer and top coat.
Features :
IBIC TefGuard is anti-corrosive primer with good adhesion, anti-corrosion properties and suitable for steel and metal substrates.Applications :
IBIC TefGuard suitable for steel and metal substrates.
Thinner / Cleaner :
IBIC Thinner No. Tef-68
Surface preparation
All surfaces should be clean and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
-
- Cleanliness : Power tool cleaning to min. St 2, mill scale free (ISO 8501-1:2007). Improved surface treatment (blast cleaning to Sa 2 1/2) will improve the performance. In case of hydrojetting the flash rust degree shall not exceed moderate in SSPC and NACE standards for water prepared surfaces.
-
- Clean, dry and undamaged approved blast-primer.
-
- Clean, dry and undamaged compatible primer. For maintenance WJ3 (NACE No.5/SSPC-SP 12) or Power tool cleaning to min. St 2 for rusted areas
-
- The coating may be used on other substrates. Please contact Beger office for more information.
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***