Toa Gold Lacquer Primer is fast drying acrylic lacquer. It made of high quality acrylic resin and special pigments that provides good hiding power and good adhesion for all substrates.
Superior radiant glow finishing.
Excellent outdoor durability for tropical climate with special feature of UV protection and mildew resistance.
Superior washability.
Type of Finishing
Semi-Gloss
Can Size
1/2 PT., 1/4 GL., 1 GL.
Application Area
It is suitable for exterior and interior application on Iron, Aluminium, Brass, Alloy,
Stainless Steel, Glass, Ceramic, Wood, Plaster, Concrete and Gypsum.
Including substitution of gold foil covering such as temple, alloy, door, wooden furniture , hall and Buddha image.
Toa Gold Lacquer Primer is fast drying acrylic lacquer. It made of high quality acrylic resin and special pigments that provides good hiding power and good adhesion for all substrates. It is suitable for exterior and interior application on Iron, Aluminium, Brass, alloy, stainless steel, glass, ceramic, wood, plaster, concrete and gypsum. Including substitution of gold foil covering such as temple, alloy, door, wooden furniture, hall and Buddha image.
APPLICATION SYSTEM Surface Preparation surface
For concrete, the surface must be dry and free from dirt,grease and other contaminants.
For steel, millscales and rust should be removed from steel by hand wire brushing or sanding with abrasive paper and then clean the surface until no dust remain.
For wood, use abrasive paper to sand the surface until smooth. Fill all wood crack and hole by filler. Sand again until the smooth surface is obtained and then clean the surface until no dust remain.
Coating system
Primer
Apply by brush or spray with TOA Gold Acrylic Primer #PL800 or PL900 at least 1 coat.
Topcoat
Can be topcoat with TOA Gold Enamel #GE234, #GE505 and TOA Gold Lacquer #GL123, #GL444 and #L9009
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.