Multipurpose special primer with color pigment formulation. Itt is made from high quality acrylic resin with small molecules. It also provides outstanding adhesion and can be used for priming over old paint or old surface that has turned into chalky dust. It will also help to transfrom the old, chalky, flaky, and uneven surface by merging new and old paint together. This helps to extend the life of the new topcoat, making it lasts longer.
Feature :
Anti-fungal and moss
No harmful toxic emission.
Strong adhesion and anti-flaking.
Protect the film from salt stain.
Type
: Multipurpose Use-Sovlent Based
Surface
: Stucco, concrete, brick, gypsum board, asbestos
cement sheet
Appearance
: Flat white Finishes
Packaging
: 3.5 Liters.
: 17.5 Liters.
Recommended Topcoat
: JBP Acrylic For Emulsion
Cleaning Solvent
: Thinner JBP T-40
Application Mixing ratio
: Brush / Roller Mix with Thinner T-40, not more
Than 5 %
Suaface Preparation : New Surface
Clean the surface Until Free from dust, cement, dirt and grease with clean cloth and water or detergent then leave the surface dry at least 1 month. Allow enough time for the surface to dry completely.
Old Surface
Remove all deteriorated, loose, chalky old paint. Do not use wire brush due to it would cause corrosion. For fungi and algaae infested area. it should be scrubbed with JBP MouldWash then leave it dry for 3 hours and no need to rinse off. Cracks on surface must be filled up with appropriate caulking compound