This anti-stain primer for concrete is frmulated with 100% pure acrylic latex. It offers enhanced adhesion and extreme durability of the color film. This is gret protection against salt stain and safe for users and homeowners.
Feature :
No harmful toxic emission.
Strong adhesion and anti-flaking.
Protect the fil from salt stain.
Type
: Acrylic Alkali Resisting Primer
Surface
: Stucco, concrete, brick, gypsum board, asbestos
cement sheet
Appearance
: Flat white Finishes
Packaging
: 3.5 Liters.
: 17.5 Liters.
Recommended Topcoat
: JBP Smart Shirld Extraguard
Application
: Water by volume
Cleaning Solvent
: Water
Application Mixing ratio
: Brush (Water by volume 0-5%)
: Roller (Water by volume 0-5%)
: Spray (Water by volume 15-20%)
Suaface Preparation : New Surface
Clean the surface Until Free from dust, cement, dirt and grease with clean cloth and water or detergent then leave the surface dry at least 1 month. Allow enough time for the surface to dry completely.
Old Surface
Remove all deteriorated, loose, chalky old paint. Do not use wire brush due to it would cause corrosion. For fungi and algaae infested area. it should be scrubbed with JBP MouldWash then leave it dry for 3 hours and no need to rinse off. Cracks on surface must be filled up with appropriate caulking compound