JBP Smart Shield Extraguard Primer (Advanced Nano Silicone-Ceramic Technology-Sheen)
This concrete primer offers 12 year of durability. It provides extreme adhesion and enhanced the durability of the color film. It also protects against salt and is safe for users and homeowner.
Description: High performance alkali resisting primer for exterior and interior. Based on 100% pure acrylic latex, provides excellent adhesion and hiding power, good resistance to water, saponification on the alkali substrate, fungi and algae growth. With Titanium Ultra Protection Technology from USA, save energy to decrease greenhouse effect with UV Ultra Protection and to reduce the temperature inner-house. With neither mercury nor lead added, it is safe to end users. Suitable for first coat primer before topcoat on new masonry surfaces
Feature :
Protect the film from salt stain.
Type
: Acrylic Alkali Resisting Primer
Surface
: Stucco, concrete, brick, gypsum board, asbestos
cement sheet
Appearance
: Flat white Finishes
Packaging
: 3.5 Liters.
: 14 Liters.
Recommended Topcoat
: JBP Smart Shirld Extraguard
Application
: Water by volume
Cleaning Solvent
: Water
Application Mixing ratio
: Brush (Water by volume 0-5%)
: Roller (Water by volume 0-5%)
: Spray (Water by volume 15-20%)
Suaface Preparation : New Surface
Clean the surface Until Free from dust, cement, dirt and grease with clean cloth and water or detergent then leave the surface dry at least 1 month. Allow enough time for the surface to dry completely.
Old Surface
Remove all deteriorated, loose, chalky old paint. Do not use wire brush due to it would cause corrosion. For fungi and algaae infested area. it should be scrubbed with JBP MouldWash then leave it dry for 3 hours and no need to rinse off. Cracks on surface must be filled up with appropriate caulking compound