4 SEASONS Red Oxide Primer 18 L. Based on a red iron oxide as anti-corrosive pigment and a special alkyd as vehicle agent. 4 Seasons Red Oxide Primer is a general purpose, economical primer for metal before topcoat with 4 Seasons Enamel Gloss. It is characterized with quick drying, good flow and strong adhesion for metal substrate etc.
Product Group
Medium
Type of Finishing
RedBrown-Matt
Can Size
5 Gallon, 18.925 L.
Protect metal surface from rust.
Special alkyd resin combined to make color film high adhesive and deeply penetrate to surface.
None added mercury and lead 100%. No harm for healthy and environmental-friendly.
Reinforce adhesion for the topcoat.
Rust Protection and Quick drying.
Use for exterior and interior.
Suitable for using on general construction steel, such as fabricated steel machineries, iron rails, gates, grills for the windows etc.
Based on a red iron oxide as anti-corrosive pigment and a speccial alkyd as vehicle agent. 4 Seasons Red Oxide Primer is a general purpose,economocal primer for metal before topcoat with 4 Seasons Enamel Gloss.
It is characterized with quick drying,good flow and strong adhesion for metal substrate,ect. It is primer for iron ,steel of general construction ,such as fabricated steel,machineries,iron rails,gates, grills for the windows, ect.
APPLICATION SYSTEM Surface Preparation
Old surface ( Steel )
Polishing the paint film peeling out and clean the dust, rust and grease-free
Old surface ( Wood )
Polishing the paint film peeling out and clean the dust and grease-free
New surface
Steel substrate must be prepared ,free from rust,millscale,dirt,loose particles,and waxy contaminate.
Wood substrate must be prepared ,free from dirt,loose particles,and waxy contaminate.
Coating system
Primer
Steel
Toa 4 Seasons red oxide primer 1-2 coat. (40 µ per coat)
Alloy
Apply 1 coat TOA Wash Primer for galvanized steel and aluminium alloy surface (10 µ per coat)
Toa 4 Seasons red oxide primer 1-2 coat . (40 µ per coat)
Topcoat
Apply 4 Season Enamel gloss 2 coat (30 µ per coat)
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.