Beger WoodStain Supreme Gloss Finish เบเยอร์ วูดสเตน ซูพรีม กลอส ฟินนิช

• Show the beautiful wood grain clearly with Crystal Clear technology.
• The color is concentrated to a thick film. Can paint a large area, apply 2 coats, equivalent to 3 coats of general wood staining.
• Protect your wood more durable with Super Resin.
• Protects wood from UV rays, sunlight and rain.
• Protects wood from mold, algae, termites, weevils and wood-eating insects.
• Safe, does not contain harmful metals like mercury and lead According to European standard EN71, no toxic residues. therefore not harmful to users and residents
• Certified by TIS 1512-2556 standard

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• Wooden case had been painted before and the paint film peeled off. Or is it an old wood that has never been painted before? To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. Then clean the surface to be free from grease, dust, oil or foreign matter.
• In case the wood stain film is in good condition Pat the film surface with 320-grit sandpaper and clean the surface to be free from grease, dust, oil or foreign matter.
• If in the case of rubber wood The rubber should be wiped clean with thinner M-77.
• Fill wood holes or nail marks with Bayer Wood Filler, leave for 30 minutes, then sandpaper and clean.

• For maximum protection of wood from mold, termites, weevils and wood-eating insects. It is recommended to apply the foundation with Beger-Drite, clear paint, water-based or oil-based formula, 1 coat. *It should be applied to all 6 sides.

• Stir thoroughly until homogeneous before use. and keep people in between by people from the bottom of the container to the top
• Can be applied without thinner, except when applied outdoors. or areas with extremely hot weather Or apply on hardwood with less absorption in the first coat should be mixed with a ratio of 15% - 20% thinner M-1199 to help Beger Supreme Stain  penetrate into the wood . get better The next trip can be applied without thinner.
• Dip the paint and wipe the paint enough to damp before applying. And should not be painted with a brush that is too saturated.
• Apply according to the wood grain and must be applied back and forth to allow the paint to penetrate the wood better.
• For exterior vertical woodwork, 3 coats should be applied, but in the case of interior woodwork usually only 2 coats. In which each trip is left to dry for 6-8 hours and should be painted on all sides of the wood. for the best protection

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***