Toptech Water Based Multipurpose Cement Primer, Code White
Delta Toptech Coat White
Water-based multi-purpose mortar primer Code White Delta Toptech Coat White is a moisture-resistant multi-purpose mortar primer formula. Suitable for old mortar, new mortar and fresh mortar, increasing efficiency in venting moisture with breathable paint film. and excellent adhesion to the surface, even water-based and penetrates deeply to prevent stains and salt deposits It also has white meat. Helps to completely mask the surface and makes it easier to paint over the face. Free from mercury, lead and heavy metals, mild odor, not pungent, Low VOCs, can be used both exterior and interior and can be used with all types of cement and all types of surfaces.
good ventilation
Excellent adhesion even in water formulations.
Excellent protection against alkalinity and salt deposits.
Free from mercury, lead and heavy metals that are harmful to the body.
Mild smell, Low VOCs, environmentally friendly.
It can be used with old mortar, new mortar, fresh mortar and all types of mortar. lightweight brick wall Fiber cement sheet Precast sheet (precast concrete)
Can be used both internally and externally
Recommended surface preparation :
New cement surfaces : before painting, the surface must be cleaned to be free from dust, cement debris, grease stains and various dirt.
Old cement surfaces: Scrub the original paint that has deteriorated completely. (Do not use a wire brush) where there is mold or algae. to scrub with Delta Bio Wash mold and algae remover, then wash and dry the surface for 1 day.
Recommendations for painting :
New cement surfaces : Apply 1 coat of Toptech Code White Water-Based Multi-Purpose Primer, allow it to dry for 2 hours, and then apply 2 coats of topcoat.
Old cement surfaces : Apply 1 coat of Toptech Code White Water-Based Multi-Purpose Primer, allow it to dry for 2 hours, and then apply 2 coats of topcoat.