MAXZO 100% Acrylic ROOF PAINT Acrylic Roof Tile Paint Maxzo Roof Paint for exterior and interior. Developed for all types of roof tiles. Produced from 100% pure acrylic with a special mixture of NaNo Latex glue from USA, providing excellent adhesion, mixed with high quality pigments, protecting the surface from UV rays (UV Protection), the color does not fade quickly. chemical resistance Good corrosion and abrasion with protection Fungi and algae with special features - versatile colors Used for tennis courts, paving blocks, and prefabricated siding. or paint the edge of the wall - Combined with German technology (Protective Hybrid Technology) to prevent dirt, water, oil embedded in the paint film - The paint film is smooth and does not easily catch dust (Low Dirt Pick Up), self-cleaning by washing Water (Self- Cleaning) resists the adhesion of dust. - can be applied over prepared surfaces Without primer (Self Primer) - does not contain harmful mercury and lead ingredients, ensuring safety. Able to support rain water for consumption.
Usage:
Multi-purpose paint on all surfaces: roof tiles, mortar under the roof cover, tennis courts, road blocks, prefabricated siding. (Fiber cement), paint the edge of the wall, paint the paint, decorate, repair the house. Can be used both internally and externally
Features of color film :
product information
color type
shade
color film characteristics
specific gravity
Viscosity (at 25°)
Paint texture (by volume)
100% pure acrylic paint, can be selected from the catalogue.
semi-gloss
1.10 - 1.25
100 - 105 Crab Units
48.00 - 52.00 %
usage information
how to apply
Brush, roller or sprayer
Dry film thickness
35 - 45 microns
area covering (Area that can be applied)
35 - 40 square meters/ 1 gallon/ 1 time
Drying time (at 30°)
Touch dry: 30 minutes
Dry to recoat: 1 - 2 hours
Dry time: 4 - 5 hours
Mixing before use:
mix with clean water 10% by volume when using a roller. The above rate is an average rate based on actual usage. Usually this type of paint is made for use. without mixing with water Or mix with water when wanting to adjust the viscosity to suit the operating conditions and air temperature and humidity.
Surface preparation: new cement surfaces - allow the walls to dry completely for at least 1 month. Clean and free from dust, cement debris and grease. Old cement surfaces - Scrub the original paint that has deteriorated completely (do not use a wire brush). Areas with mold or algae must be scrubbed with hypochlorite solution. (White laundry detergent) if there are cracks. should be repaired Wash, clean and leave to dry for 2-3 days . Painting system: Paint MAXZO 100% ACRYLIC ROOF PAINT roof tiles on the prepared surface immediately. Without having to paint the primer 2-3 coats, space the paint applied for each coat to dry completely first. Therefore, paint over the next trip