TOA Protile is a grey cementitious powder, single component tiling adhesive mortar containing cement, selected fine grain aggregates and specialty chemical additives. It is supplied ready-to-use with the addition of water giving good bonding for laying tiles on walls and floors, interior and exterior.
Type of Finishing
Grey
Can Size
20 Kg.
Excellent adhesion strength onto the substrate
TOA Protile provides the following beneficial properties :
Finished Mix from the factory.The quality is consistency.
Easy to use, only mix with water.
Laying ceramic tiles up to size 60 x 60 cm.
Suitable for floors and walls, both interior and exterior.
FEATURES : TOA Protile is a grey cementitious powder, single component tiling adhesive mortar containing cement, selected fine grain aggregates and specialty chemical additives. It is supplied ready-to-use with the addition of water giving good bonding for laying tiles on walls and floors, interior and exterior.
USES TOA Protile is used for the following areas :
Tile on wall and Floor
Cereamic tiles up to 60 X 60 cm.
Clay tiles, Granito tiles, Mosaic tiles
Interior and Exterior
Types of substrate : Cement and concrete
APPLICATION SYSTEM Surface Preparation :
Substrate must be sound, free of loose or weak particles, dust and dirt. Oil and wax containing layers, as well as laitance must be completely removed.
Clean the surface by using water jet before using TOA Protile.
In case of porous substrate, make sure the substrate is wet and absorb water before tiling.
New plastering or self levelling mortar must be allowed to cure for at least 7 days.
Application :
Mix 20 kgs. of TOA Protile with clean water 5.0 – 5.2 liters. Mix well with a low speed mixer until the compound is evenly mixed.
Leave the mixture for 3 - 5 minutes for chemical curing and reducing air bubble, then remix before using.
Use a flat trowel to smooth TOA Protile on the floor or wall.
Use a trowel to scrape the groove all over. Select the groove of the trowel comb to match the thickness of TOA Protile and the size of the tile.
Lay down the tile on TOA Protile and knock the tiles firmly to the tile adhesive. Make sure the tile is fully touched with tile adhesive.
Each tile can be adjusted within 15 minutes. Leave it to dry 24 hours before grouting.
Recommendation :
The surface must be throughly wetted down prior to apply.
Do not use TOA Protile during strong sunshine or on hot substrate it will cause the open time is less than normal - For high adhesion. All back side of the tile must be contact with TOA Protile.
Wash all tools immediately after use with water.
USAGE RATE
The average is 20 kgs. / 4 m2
HANDLING AND STORAGE
Storage
Keep all containers well closed.
Shelf life
Keep in a dry cool place.
Shelf life is up to 1 year in original unopened packaging. Store in dry place.