ทีโอเอ วอช ไพรเมอร์ จี 1168 Toa wash primer (G1168)

• Old surface
  • The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
  • Chalky surfaces or loose material must be removed by stiff brush.
  • The surface must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.

• Primer
  • 1. Mixing ratios of TOA Wash Primer Part A + Part B + TOA Thinner #61 are 8 : 2 : 5 for first coat and 8 : 2 : 3 for second coat, respectively.
  • 2. Recommend to apply by brush with TOA Wash Primer 1 coats. (Wet film thickness is 50 – 100 microns/coat and recoatable time is at least 1 hour)
• Topcoat
  
  • Apply by brush with TOA Enamel Gloss at least 2 coats.(Wet film thickness is 80 – 100 microns/coat)

• The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***