TOA Wood Preservative Plus Toa Wood Preservative Transparent is a premium grade preservative. It protects wood from mold, termite, snout beetle, ant etc. and prolongs wood degeneration.
Type of Finishing
Transparent
Can Size
1 GL.
Excellent Mold Protection
Developed with Anti-All Insects Protect wood from termite, snout beetle, ant and etc.
Toa Wood Preservative is based on special preservative ingredients that suitable for both new and old wood. The properties of this product are good penetration into the wood., anti-fungi Suitable for interior and exterior woodworks such as floor, fence, furniture and etc.
APPLICATION SYSTEM Surface Preparation
Old surface
For coated wood or wood with old or peeling paint film or old wood with no coating.
Sand with abrasive paper to the wood surface. Sand over the painted film withTOA abrasive paper no. 240-320 then clean the surface to remove grease, dust, oil or dirt.
New surface
1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. Clean the surface until no dust remain.
Coating system
Primer
Apply by brush with Toa Wood Preservative at least 1 coat. (Recoatable time is at least 30 minutes)
Topcoat
Can be topcoat with Toa Lacquer, Toa Varnish, Toa Wood Stain, Toa Decking Stain, Toa Teak Oil or TOA PU 1K and 2K.
Recommendation
The temperature of the substrate should be minimum 10 dC and at least 3 dC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.