สีย้อมไม้ ทีโอเอ วู้ดสเตน ชนิดกึ่งเงา TOA WoodStain Semi-Gloss

Type of Finishing	Semi-Gloss
Can Size	1/4 GL., 1 GL.
Support

• 2 Times higher durable paint film with Titanium Nano agent from Germany.
• Translucent paint film & Highlighting wood texture appearance by Transparent Pigment
• 5 Times faster dry & Reducing dust stick on paint film.
• With UV Absorber, preventing wood from UV light.
• Flexible film No crack, blister and peel.
• Easy to wash.
• Excellent anti-bacteria, anti-moth and anti-termite.
• Free from dangerous heavy metals Lead & Mercury.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• Toa Wood Stain Semi Gloss is based on modified alkyd resin, special additives and transparent pigments. The properties of this product are excellent UV resistance, high flexibility, good waterproof, anti-fungi, good leveling, high film build, high gloss and good penetration into the wood that provides excellent adhesion.
  
• Suitable for all interior and exterior woodworks such as wall, gable, ceiling, handrail, wooden fence, wooden furniture and etc.

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating.
    
  • Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
    
  • Sand over the painted film with TOA abrasive paper no. 240-320
    
  • then clean the surface to remove grease, dust, oil or dirt.
• New surface
  
  • 1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
    
  • 2. Fill all wood crack and hole by filler.
    
  • 3. Sand again until the smooth surface is obtained.
    
  • 4. Clean the surface until no dust remain.

• Primer
  
  • Apply by brush with TOA Wood Preservative 1 coat.(Recoatable time is at least 30 minutes)
• Topcoat
  
  • 1. Mixing ratios between TOA Wood Stain Semi-Gloss and TOA Enamel Thinner No.21 are 5:1 for first coat and 10:1 for second and third coat, respectively.
    
  • 2. Apply by brush with TOA Wood Stain Semi-Gloss at least 3 coats. (Recoatable time is at least 6 hours)
    
  • 3. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 dC and at least 3 dC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***