สีทาฝ้า เจบีพี ซอร่า พี. ชนิดด้าน JBP Sora P. Acrylic For Ceiling

 JBP Sora P. Acrylic For Ceiling 

  Description :
  Provides extra-matt finish. This topcoat is formulated with top quality acrylic latex especially for ceiling work. It offers extreme adhesion, ultimate hiding power to cover ceiling imperfections such as uneven area between ceiling panels. It also reduces the reflected light on the ceiling. It does not contain any mercury and lead and is suitable for all surfaces and gypsum ceiling panels.
 
  Feature :

• 15,000 times clean up
• Anti-fungal and moss 
• Reflect heat more than 96.3%
• No harmful toxic emission.
• large amount of pigment, good coverage
• Strong adhesion and anti-flaking.

• Clean the surface Until Free from dust, cement, dirt and grease with clean cloth and water or detergent then leave the surface dry at least 1 month. Allow enough time for the surface to dry completely.

• Remove all deteriorated, loose, chalky old paint. Do not use wire brush due to it would cause corrosion. For fungi and algaae infested area. it should be scrubbed with JBP MouldWash then leave it dry for 3 hours and no need to rinse off. Cracks on surface must be filled up with appropriate caulking compound  

• Sora P. Primer for Interior #7711 or immediately after stucco 2 day or humidity up to 45% with JBP Superme Primer #2900 (Water Based)

• JBP Chalky Wall Sealer #900 (Water Based) 

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***