TOA Skim Coat is a cement based modified polymer for thin plastering application with thickness varying from 0.5 – 2 mm. It is used to cover pinholes, correct unevenness and minor imperfections in concretes. When applied properly will obtain a high bonding, non-cracking and a smooth surfaces.
Type of Finishing
Grey, White
Can Size
20 Kg.
Excellent workability and easy to sand
TOA Skim Coat provides the following beneficial properties :
Skim coating for concrete wall, column, ceiling and joints etc.
Give very smooth surface finishing.
Good bonding to sound substrate and paint.
Save paints when painting.
Use for both interior and exterior.
TOA Skim Coat is used for cosmetic repairs to concrete surfaces, precast concrete panels, brick and block works etc.
TOA Skim Coat is a cement based modified polymer for thin plastering application with thickness varying from 0.5 – 2 mm. It is used to cover pinholes, correct unevenness and minor imperfections in concretes. When applied properly will obtain a high bonding, noncracking and a smooth surfaces.
USES
TOA Skim Coat is used for cosmetic repairs to concrete surfaces, precast concrete panels, brick and block works etc.
ADVANTAGES : TOA Skim Coat provides the following beneficial properties :
Skim coating for concrete wall, column, ceiling, joints, etc.
Excellent workability and easy to sand.
Give very smooth surface finishing.
Good bonding to sound substrate and paint.
Save paints when painting.
Use for both interior and exterior.
APPLICATION SYSTEM Surface Preparation : : New Surface
Leave the surface to dry for at least 2 weeks.
Clean the surface from dust, oil, paint and other contaminants.
: Old Surface
Remove old paint and leave to dry, apply TOA Contact Primer to reinforce the substrate.
Overplus and seams must be struck off.
Remove any free surface water and repair cracks before application.
Pre-wet the substrate prior to apply for better adhesion and proper curing.
Application
Blend 20 kgs.(1 bag) of TOA Skim Coat into 7.0 – 8.5 litre of water using a paddle mixer with a low speed until a smooth workable consistency is achieved.
Plaster with TOA Skim Coat and leave to dry for 1 - 2 hours prior to apply into another coat.
Sand the surface with sandpaper for more smoothness.
Leave for curing 3-7 days before apply the paint in accordance with correct painting procedure.
Recommendation
The surface must be throughly wetted down prior to apply.
Do not use TOA Skim Coat during strong sunshine or on hot substrate to prevent cracks.
Do not use this product while raining.
The crack must be sealed before the primary coat.
Do not apply one time for high thickness, TOA Skim Coat must be applied for several layers.
Wash all tools immediately after use with water.
USAGE RATE
1.0 - 1.2 kg / 1 m2 / 1 mm. thickness
HANDING AND STORAGE
Storage
Keep all containers well closed. - Keep in a dry cool place.